Skip to main content

FIJI MF – FAME in MultiFuels - SA5200-0

Petroleum and Fuel Analysis

Offer a rapid and easy check on Parts Per Million (ppm or mg/kg) levels

The patented FIJI has been developed to offer a rapid and easy check on Parts Per Million (ppm or mg/kg) levels of FAME in aviation fuel, distillates, residuals and gasoline.

FIJI uniquely utilises FTIR (Fourier Transform Infra-Red Spectroscopy) technology and a patented sample preparation system which allows FAME detection accuracy down to the 10 mg/kg level.

Brochure

System Description

FIJI can be used as a field or lab based screening tool to give a quick indication of possible FAME contamination that may then necessitate further investigations. The instrument helps to prevent expensive testing and avoid costly delays of fuel release.

  • ● 10-150ppm (mg/kg) in Jet Fuels

  • ● 20 mg/kg to 50% in Distillate & Residual Fuels

  • ● Measures the presence of all FAME types C8 to C22

  • ● Approved for co-processed fuels

  • ● No hydrocarbon cleaning solvents required

  • ● Laboratory and field instrument

  • ● Suitable for untrained operators

  • ● Patent approved

Product Specialist

Mikael Alfredsson Kovalent

Mikael Alfredsson

"Our expert in Digestion, Extraction, Syntesis and Evaporation with more than 20 years experience in the field of sales and service. Contact me for if you have questions or need a quotation"

mikael.alfredsson@kovalent.se

031-709 81 86

Additional Information

Ease of use:
The instrument is extremely simple to use and fully automatic, specialist operator training is not required.
The system is self-cleaning, no solvents are required. After each test you simply replace the cartridge and the instrument is immediately ready for the next sample.

Enhanced test throughput:
Tests require less than 50 ml of sample and typically take under 20 minutes.
Results are presented in mg/kg units together with an optional traffic light system for flagging FAME contamination levels of the fuel.
By comparison current analytical tests can take many hours, require complex equipment and demand high skill levels.

Precision and accuracy:
Using a unique sample preparation module the sample is pumped at a controlled flow rate though a proprietary disposable cartridge.
The sample components are analysed by the FTIR and a result is displayed in mg/kg, a graphical spectrum is also shown.

Please note: FIJI IP 583 Starter Kit (SA5001-0) is required for initial operation.

Industries

  • ● Aviation

  • ● Marine

  • ● Petroleum - Fuels and Oils

Methods

  • ● ASTM D1665

  • ● ASTM D7797

  • ● ASTM D7963

  • ● IP 583

  • ● DEF STAN 91-091

  • ● ISO 8217