PAL RTC/RSI/LSI Modules

For the efficient centrifugation in automated workflows (e.g. protein precipitation, phase separation)

Relative centrifugal force: 

2000 x g with Centrifuge Combi 
5000 x g with Centrifuge 2 mL

Vial format:

Centrifuge Combi: 2 mL (6 vials) + 
                          10 mL / 20 mL (2 vials)
Centrifuge:           2 mL (8 vials)

See the Centrifuges Module brochure 

Opens/closes 2, 10, 20 mL screw cap vials without any change of hardware (no adapters required)

A defined torque guarantees the reproducible and leak-tight closing of headspace vials

PAL Re-Cap vials ensure consistent performance for multiple open/close cycles

See the DeCapper Module brochure 

For efficient and accurate addition of larger amounts of liquids

100µL, 1mL (standard), 5mL & 10mL dispensing syringes available

Optional selector valves allow dispensing of up to 5 different liquids

 Application notes availible

Cleans syringes of  gauges  19 to 26

Integrated pumps for active wash solvent delivery

Supports two different wash solvents (e.g. aqueous and organic)

Reduced wash solvent consumption by automatic flow adjustments

Can be mounted underneath Valve Drives to minimize required space

Wash Module for large volume injections

2x 100mL solvent vials

Waste port with connector for waste bottle

For powerful mixing and heating in sample prep and SPME Arrow

Temperature range 30° - 150°C

Stirring speed up to 1600 rpm (200 cycloidal loops)

Optimized for 20mL vials (for 10 mL vials special adapters are required)

For the conditioning of SPME Arrow and SPME fibers prior to sample enrichment, max. 350°C

Position for automated conditioning

Position for manual pre-conditioning

Automated purge gas valve

Manual gas valve for pre-conditioning

Replacement liners for easy maintenance

Wash Module for low volume injections

4x 10mL wash solvent vials

1x 10mL waste vial

Optional waste port  to connect a waste bottle

For the storage of two racks or plates under defined temperature conditions between 4°C and 40°C. Allows to use transparent standard vials with light sensitive compounds. A maximum of four Peltier Stacks can be configured on a PAL with extended x-axis length.

Capacity:

• 2x MTP (Multi Titer Plate)
• or 2x DW (Deep Well Plate)
• or 2x VT15 (15 x 10mL)
• or 2x VT54 (54 x 2mL) 
• or 2x VT70 (70 x 1mL) 
• or combinations

For the storage of six racks or plates under defined temperature conditions between 4°C and 40°C. Allows to use transparent standard vials with light sensitive compounds. A maximum of four Peltier Stacks can be configured on a PAL with extended x-axis length.

Capacity:

• 6x MTP (Multi Titer Plate)
• or 6x DW (Deep Well Plate)
• or 6x VT15 (15 x 10mL)
• or 6x VT54 (54 x 2mL)
• or 6x VT70 (70 x 1mL)
• or combinations

For the storage of racks or plates at room temperature. Allows to store samples with light sensitive compounds. A maximum of four Stacks can be configured on a PAL with extended x-axis length.

Capacity 6DW:

• 6x MTP (Multi Titer Plate)
• or 6x DW (Deep Well Plate)
• or 6x VT15 (15 x 10mL)
• or 6x VT54 (54 x 2mL)
• or 6x VT70 (70 x 1mL)
• or combinations

Capacity 12MT:

• 12x MTP (Multi Titer Plate, shallow well)

The Trayholder offers sample storage at room temperature. A PAL with extended x-axis length can hold up to 7 Trayholders.

Capacity:

• 3x MTP (Multi Titer Plate)
• or 3x DW (Deep Well Plate)
• or 3x VT15 (15 x 10/20mL
• or 3x VT54 (54 x 2mL)
• or 3x VT70 (70 x 1mL)
• or combinations
• or 60x 10/20mL (with one R60 tray)

Universal Valve Drive Module for sample injection, column switiching for online LC-LC-MS or online SPE-LC-MS, multiplexing, column selection and many more.

The Valve Drive Module supports VICI/Valco and Rheodyne valve types.

Injection port bottom sensing minimizing carryover

Constant Force Technology to reduce dead volume during injection process

UHPLC/HPLC: up to 50% faster switching times for optimum system performance and prolonged column life time

Stackable design to reduce the space demand and allow any flexible configuration

Huge flexibility to arrange multiple valve solutions

The Fast Wash Module is also stackable below a Valve Drive

For efficient mixing during liquid homogenization and extraction steps.

Magnetic transportation

Standard vial sizes: 2mL / 10mL / 20mL

One additional slot for custom size vials

Provides very efficient mixing